The MC1321x System in Package (SiP) integrates the MC9S08GT MCU
with the MC1320x transceiver into a single 9x9mm LGA package.
The MC13211 provides 16 K Flash memory and 1 K of RAM , providing
the ideal low cost solution for point-to-point and star network
applications.
Features
40 MHz HCS08 low-voltage, low-power core
16 KB Flash and 1KB RAM memory
Seven addressing modes for CPU
Multiple 16-bit timers
2V to 3.4V operating voltage with on chip voltage regulator
-40 to +85 degrees C operating temperature
Low external component count
Requires a single 16 MHz crystal
Programmable frequency clock output for MCU
Auto-trim feature for crystal accuracy
Eliminate need for external variable capacitors
Allows for automated production frequency calibration
Two independent serial communication interfaces (SCI) supporting up
to 115.2 kBaud
Inter-integrated circuit (I2C) with 100 kbps maximum bus loading
Internal clock generator (ICG) at 100 kHz or 16 MHz (including
internal reference generator)
Low-voltage detection
In-circuit debug and Flash programming available via on-chip
background debug module (BDM)
Programmable low voltage interrupt (LVI)
Common on-chip processor (COP) watchdog timer
Operates in the 2.4GHz band
250 kbps O-PQSK modulation
16 selectable channels
0 dBm nominal output power
Programmable from -27 dBm to +3 dBm
Receive sensitivity of -92 dBm (typical) at 1% PER
Integrated transmit/receive switch
Supports single-ended or full differential operation
Supports external low-noise amplifier (LNA) and/or Power Amplifer
(PA)
Three lower power modes for increased power life
Supports streaming and data processing modes
MC13211 Software Features
Simple MAC
Small memory footprint (< 4 KB)
Supports point-to-point and star network configurations
ANSI C source code
The MC13212 System in Package (SiP) integrates the MC9S08GT MCU
with the MC1320x transceiver into a single 9x9mm LGA package.
The MC13212 provides 32 K Flash memory and 2 K of RAM, providing an
ideal platform for applications that require a star network
using the Freescale SMAC or IEEE 802015.4 Compliant PHY/MAC.
Features
40 MHz HCS08 low-voltage, low-power core
32 KB Flash and 2 KB RAM memory
Seven addressing modes for CPU "
Multiple 16-bit timers
2V to 3.4V operating voltage with on chip voltage regulator
-40 to +85 degrees C operating temperature
Low external component count
Requires a single 16 MHz crystal
Programmable frequency clock output for MCU
Auto-trim feature for crystal accuracy
Eliminate need for external variable capacitors
Allows for automated production frequency calibration
Two independent serial communication interfaces (SCI) supporting up
to 115.2 kBaud
Inter-integrated circuit (I2C) with 100 kbps maximum bus loading
Internal clock generator (ICG) at 100 kHz or 16 MHz (including
internal reference generator)
Low-voltage detection
In-circuit debug and Flash programming available via on-chip
background debug module (BDM)
Programmable low voltage interrupt (LVI)
Common on-chip processor (COP) watchdog timer
Operates in the 2.4GHz band
250 kbps O-PQSK modulation
16 selectable channels
0 dBm nominal output power
Programmable from -27 dBm to +3 dBm
Receive sensitivity of -92 dBm (typical) at 1% PER
Integrated transmit/receive switch
Supports single-ended or full differential operation
Supports external low-noise amplifier (LNA) and/or Power Amplifer
(PA)
Three lower power modes for increased power life
Supports streaming and data processing modes
MC13212 Software Features
Simple MAC
Small memory footprint (< 4 KB)
Supports point-to-point and star network configurations
ANSI C source code
IEEE 802.15.4 compliant MAC
Supports star, mesh and cluster tree topologies
Supports beaconed and non-beaconed networks
Supports guaranteed time slots (GTS) for predicable latency
128-bit Asymmetric Encryption Standard (AES)
Object Code
The MC13213 System in Package (SiP) integrates the MC9S08GT MCU
with the MC1320x transceiver into a single 9x9mm LGA package.
The MC13213 provides 60 K Flash memory and 4 K of RAM. By
using the IEEE 802.15.4 Compliant MAC, or BeeStack ZigBee Protocol
Stack, the MC13213 is an ideal solution for sensing and control
applications that require mesh networking.
Features
40 MHz HCS08 low-voltage, low-power core
60 KB Flash and 4KB RAM memory
Seven addressing modes for CPU
Multiple 16-bit timers
2V to 3.4V operating voltage with on chip voltage regulator
-40 to +85 degrees C operating temperature
Low external component count
Requires a single 16 MHz crystal
Programmable frequency clock output for MCU
Auto-trim feature for crystal accuracy
Eliminate need for external variable capacitors
Allows for automated production frequency calibration
当前离线
