Intel R1000 数据手册（UHF读写器芯片组），一共74页。
Product Features
RFID Reader Radio on a Chip
— ISO 18000-6C
— EPCglobal Gen 2
— 860-960 MHz
— All modes and data rates
Multiple Geography Support
— FCC 47 CFG Ch. 1 Part 15
— ETSI EN 302 208-1 (V1.1.1)
Integrated Power Amplifier
Transmit Output Power adjustable over 15 dB
Quadrature Direct Conversion Transceiver
High Compression Point Front End
Integrated Synthesizer with external loop components
High Level Integration
— Low External Component Count
— Enables new usage models
0.18 μ SiGe BiCMOS process
56 pin 8 mm x 8 mm x 1 mm QFN package
Low Power
Configurable Digital Baseband
RSSI
— Wideband Peak Detector
— Narrowband
— Tag RSSI
Receiver Sensitivity
— down to -95 dBm (DRM)
— down to -110 dBm (LBT)
介绍
The Intel® UHF RFID Transceiver R1000 is a highly integrated,
high-performance, low
power, Silicon Germanium BiCMOS device for ISO18000-6C and
Electronic Product
Council (EPC) Gen 2 applications. Intel UHF RFID Transceiver R1000
supports a zero
intermediate frequency (ZIF) architecture in the worldwide UHF
industrial, science, and
medical (ISM) band. The Intel UHF RFID Transceiver R1000 comprises
all of the RF
blocks to interrogate and receive data from compatible RFID tags,
specifically:
• High compression point quadrature downconverting mixer
• Fully integrated voltage controlled oscillator (VCO)
• Variable receiver (RX) gain control
• Integrated power amplifier (PA)
• Integrated RF envelope detectors for forward and reverse power
sense
• Integrated multipurpose analog-to-digital converts (ADCs) and
digital-to-analog
converters (DACs)
• Configurable digital baseband
• High speed synchronous serial bus or 4-bit parallel bus control
When used in the Intel® R1000 Development Platform, which includes
an example
protocol processor and radio control implementation, the result is
a fully functional UHF
RFID reader.
这是一个UHF频段的RFID芯片组资料，很好哦，需要的赶紧下载哦！
当前离线
好资料啊！一直在找它，谢了。
