6.1ISE版本为什么不能打开例程

奇怪，一直都用6.1，可能老了点，但一直很好用呀。
现在跑BASYS板子的例程却发现找不到工程文件（.npl）,
请问是不是有什么问题，是版本过旧吗

看看类似的情况。可能是include目录路径设置问题

Basicly the  problem is you are in a wrong directory, .npl project file is in a wrong
directory thus you must copy evrything in one folder because  6.1 is set to search its defined include paths.

----- Original Message -----
From: Richard Sliwinski<rvs@i...>
To:
Date: Sat Feb  7 15:10:07 CET 2004
Subject: [pci] Re: ISE 6.1SP3 project file.

> Thank you for any info you can give me!
> Richard
> > > It work in ISE 6.1SP3
> > >
> > > :)
> > >
> > > cristian
> > >
> > >
> > > Hi Cristian,
> > > I am using ISE 6.1SP3 for pci bridge CRT files.
> > > I can not read ..\apps\crt\syn\webpack\ise-openpci.npl
> project file.
> > > (error message: "Source file
> ..\apps\crt\verilog\top.v does not exist.")
> > > Could you please send me ise-openpci.npl project file
> that works with
> > > ISE6.1SP3.
> > > Thank you,
> >
> > I send you my whole folder (private) as arrive to home,
> basicly the
> > problem is you are in a wrong directory, .npl project file is
> in a wrong
> > directory plus you must copy evrything in one folder because
> 6.1 leack
> > to search its defined include paths.
> >
> > Cristian
> >
> >
> >
>
>