1. # lsmod | grep usbserial (如 果直接使用串口线，而没有用到USB转串口设备，此步可以跳过)
如果有usbserial，说明系统支持USB转串口。
2. 安装minicom (Fedora自带有minicom，此步可以跳过)
apt-get install minicom
apt-get install lrzsz
3. 配置minicom
# minicom -s
Serial port setup [Enter]
+-------------------------------------------------------------+
| A - Serial
Device : /dev/ttyUSB0
|
| B - Lockfile Location
:
/var/lock
|
| C - Callin
Program
:
|
| D - Callout
Program -:
|
| E -
Bps/Par/Bits : 115200 8N1
|
| F - Hardware Flow Control :
No
|
| G - Software Flow Control :
No
|
|
|
| Change which
setting?
|
+-------------------------------------------------------------+
注: 如果没有使用USB转接口，Serial Device要配置为/dev/ttyS0
Save setup as dfl
Exit from Minicom
4. 使用minicom传输文件
-----------------------------------
# minicom
(Ctrl + a) --> s --> zmodem --> [Okay] -->
+-----------------------------------------+
|No file selected - enter
filename: |
|>
/home/zxl/ssl/codes/led/lls_led.ko |
[Enter]
+-----------------------------------------+
注: download kernel by minicom in ubuntu
--------------------------------------------------
When I download linux kernel by x protocol in
minicom, it says "Failure executing protocol, press any key to
continue".
The problem is the x protocol isn't installed
bye ubuntu by default, so you should install it by hand:
# apt-get install lrzsz
After successful download and install, you can
send files by x protocol in minicom.
lrzsz包括了x/y/zmodem协议
安装lrzsz
--------------------------------------------------
1. 从下面的网站下载lrzsz-0.12.20.tar.gz
http://www.filewatcher.com/m/lrzsz-0.12.20.tar.gz.280938.0.0.html
2. tar zxvf lrzsz-0.12.20.tar.gz
3. 查看里面的INSTALL文档了解安装参数说明和细节
4. # cd lrzsz-0.12.20
5. # ./configure --prefix=/usr/local/lrzsz
6. # make
7. # make install
8. 建立软链接
# cd /usr/bin
# ln -s /usr/local/lrzsz/bin/lrz rz
# ln -s /usr/local/lrzsz/bin/lsz sz
这样minicom就可以使用zmodem传输文件了
配置文件所在目录
--------------------------------------------------
Ctrl + a o
;){kind=link}