我的第一个PSoC工程--LED-blink

sky-Hawk where · TA的每日心情 开心 2016-12-26 21:04

今天安装了PSoC Creator 2.1，根据自带的文档开始了第一个PSoC开发项目。相当的爽啊。果然强大。

Notice List输出的红色部分，搞过FPGA的就知道是在综合、布局布线、映射之类的硬件开发。
绿色部分，就是C51的编译了。最后成功了，就等着实际的target硬件来开发调试了。
看来PSoC从设计理念上可以匹敌Altera和Xilinx的SOPC了。开发流程也差不多。先搭好硬件HDL，然后软件C、ASM。

--------------- Build Started: 09/11/2012 22:09:30 Project: Design01, Configuration: DP8051 Keil 9.03 Debug ---------------
cydsfit.exe "-.appdatapath" "C:\Users\hvdc\AppData\Local\Cypress Semiconductor\PSoC Creator\2.0" "-.fdsnotice" "-.fdswarpdepfile=warp_dependencies.txt" "-.fdselabdepfile=elab_dependencies.txt" "-.fdsbldfile=generated_files.txt" "-p" "E:\software\PSoC Creator\Design01\Design01.cydsn\Design01.cyprj" "-d" "CY8C3866AXI-040" "-s" "E:\software\PSoC Creator\Design01\Design01.cydsn\Generated_Source\PSoC3" "-w" "0" "--" "-yv2" "-w" "0" "-v3" "-ygs" "-q10" "-o2" "-.fftcfgtype=BE"
Elaborating Design...
HDL Generation ...
Synthesis ...
Place and Route ...
Tech mapping ...
Info: mpr.M0037: Unused pieces of the design have been optimized out. See the Tech mapping section of the report file for details. (App=cydsfit)
Analog Placement ...
Analog Routing ...
Digital Placement ...
Log: plm.M0040: The pin named Pin_1(0) at location P0[2] prevents a direct input connection to an Opamp. (App=cydsfit)
Log: plm.M0040: The pin named Pin_2(0) at location P0[3] prevents a direct input connection to an Opamp. (App=cydsfit)
Info: plm.M0037:
   Certain internal analog resources use the following pins for preferred routing: P0[2], P0[3].
   Please check the "Final Placement Details" section of the report file (Design01.rpt) to see what resources are impacted by your pin selections.
   (App=cydsfit)
Digital Routing ...
Bitstream Generation ...
Static timing analysis ...
API Generation ...
Dependency Generation ...
Clean Temporary *** ...
c51.exe .\main.c NOIV LARGE MODDP2 OMF2 VB(1) PR(.\DP8051\DP8051_Keil_903\Debug\main.lst) CD DB NOIP "OT(2, Size)" INCDIR(Generated_Source\PSoC3) OJ(.\DP8051\DP8051_Keil_903\Debug\main.obj)
c51.exe .\Generated_Source\PSoC3\Pin_1.c NOIV LARGE MODDP2 OMF2 VB(1) PR(.\DP8051\DP8051_Keil_903\Debug
......
......
......
Program Size: data=11.0 xdata=112 const=253 code=2741
OHx51.exe Design01.omf HEXFILE(Design01.ihx)
c8051-elf-omf2elf.exe Design01.omf Design01.elf
cyhextool -o .\DP8051\DP8051_Keil_903\Debug\Design01.hex -f .\DP8051\DP8051_Keil_903\Debug\Design01.ihx -prot .\Generated_Source\PSoC3\protect.hex -id 1E028069 -a EEPROM=90200000:800,PROGRAM=00000000:10000,CONFIG=80000000:2000,PROTECT=90400000:40 -meta 0301 -cunv 00000005 -wonv AFAC90BC -ecc .\Generated_Source\PSoC3\config.hex
Flash used: 2994 of 65536 bytes (4.6 %).
SRAM used: 112 of 8192 bytes (1.4 %).
--------------- Build Succeeded: 09/11/2012 22:10:00 ---------------