芯耀
与非AI
Also verify that there is ~9V present on pin 11 after you power-up the interface in step 11 and 5V on the power supply pin 5. If you have an oscilloscope, check whether the oscillator is running
阅读全文
117
扫码加入Step-by-step instructions for programming the JB8 microcontroller in the TBDML design
Also verify that there is ~9V present on pin 11 after you power-up the interface in step 11 and 5V on the power supply pin 5. If you have an oscilloscope, check whether the oscillator is running
人工客服
© 2010 - 2026 苏州灵动帧格网络科技有限公司 版权所有
ICP经营许可证 苏B2-20140176 | 苏ICP备14012660号-6 | 苏公网安备 32059002001874号
扫码关注
扫码加入
电子硬件助手
元器件查询
