芯耀
258
在电子电路研发、传感器测试及教育实验领域，一款能够提供多种标准波形、具备调制功能且频率范围宽广的信号源是基础而重要的工具。NF公司（NF Corporation）的WF1973 波形发生器以其覆盖直流至30 MHz的宽频带输出、丰富的波形种类和实用的调制功能，为工程师和技术人员提供了灵活可靠的信号生成解决方案。
为确保此类基础信号源长期保持准确的输出性能，定期的校准与维护十分必要。深圳市宝安区沙井方丰瑞仪器设备经营部在基础测试仪器支持领域具备专业能力，可为WF1973用户提供专业的技术服务。
WF1973：功能与实用性的平衡
核心性能与技术特点：
宽广的频率范围与多种波形
频率范围覆盖 0.01 Hz 至 30 MHz（正弦波），满足从超低频到高频射频段的基础测试需求。
可输出 正弦波、方波、三角波、锯齿波、直流电压 等多种标准波形。
方波上升/下降时间快（典型值 < 15 ns），适用于数字电路测试。
实用的调制与扫描功能
支持 振幅调制（AM）、频率调制（FM）及频移键控（FSK） 等调制模式。
提供 线性/对数扫描 功能，可自动在设定的频率范围内扫描，用于电路频响的快速评估。
具备 触发/门控（Burst） 模式，可输出指定数量的周期波形，适用于脉冲式应用。
高精度与稳定性
采用 直接数字合成（DDS） 技术，频率分辨率高，相位噪声低，频率切换速度快。
输出幅度范围宽，最高可达 20 Vp-p（进入高阻负载），并支持 直流偏置 叠加。
便捷的操作与连接
配备大型背光LCD显示屏，参数显示清晰。
前面板布局直观，旋钮与按键结合，便于快速设置。
标配 USB 接口，支持远程控制和数据存储（需相应软件支持）。
典型应用场景
模拟电路测试与调试：为放大器、滤波器等电路提供激励信号，观测其响应。
传感器激励与仿真：生成特定波形用于驱动或模拟传感器信号（如超声波、振动传感器）。
教育与培训实验：在高校电子实验室中，用于演示信号特性、调制原理及电路基础实验。
专业校准保障信号准确性
波形发生器的输出频率、幅度精度、波形失真度（如正弦波总谐波失真THD）等关键参数会随时间发生漂移。定期校准是确保其输出信号符合规格、满足测试要求的基础。
深圳市宝安区沙井方丰瑞仪器设备经营部可为WF1973提供以下专业服务：
输出精度校准：对仪器的输出频率精度、幅度精度（各衰减档位）、直流偏置精度进行校准。
波形质量验证：测量正弦波的总谐波失真（THD）、方波的上升/下降时间及过冲等参数。
调制功能检查：验证AM、FM等调制功能的深度、精度及线性度。
故障诊断与维修：对无输出、波形失真、频率不准、按键失灵等常见故障进行诊断与维修。
结语
NF WF1973波形发生器以其宽频率覆盖、多样的波形输出和实用的调制功能，在研发、教学和基础测试中扮演着可靠“信号源”的角色。它在性能、功能和成本之间取得了良好的平衡。
确保这一灵活的信号平台持续稳定、精确地工作，是许多实验和测试流程顺利进行的前提。通过与 深圳市宝安区沙井方丰瑞仪器设备经营部 这样的专业服务伙伴合作，用户可以确保其WF1973及其他测试仪器保持良好的技术状态，为日常工作和创新提供准确可靠的信号激励。
NF WF1973 Waveform Generator: Balancing Functionality and Practicality
In the fields of electronic circuit R&D, sensor testing, and educational experiments, a signal source capable of providing multiple standard waveforms with modulation functions and a wide frequency range is a fundamental and essential tool. The NF WF1973 Waveform Generator, with its wide-band output from DC to 30 MHz, rich variety of waveforms, and practical modulation functions, offers engineers and technicians a flexible and reliable signal generation solution.
To ensure that such basic signal sources maintain accurate output performance over the long term, regular calibration and maintenance are necessary. The Shenzhen Bao'an Shajing Fangfengrui Instrument Equipment Business Department, with its professional expertise in supporting basic test instruments, can provide professional technical services for WF1973 users.
WF1973: Balancing Functionality and Practicality
Core Performance and Technical Features:
Wide Frequency Range and Multiple Waveforms:
Frequency range covers 0.01 Hz to 30 MHz (sine wave), meeting basic testing needs from ultra-low frequency to high RF bands.
Can output various standard waveforms including sine, square, triangle, ramp, and DC voltage.
Fast square wave rise/fall time (typically < 15 ns), suitable for digital circuit testing.
Practical Modulation and Sweep Functions:
Supports modulation modes such as Amplitude Modulation (AM), Frequency Modulation (FM), and Frequency Shift Keying (FSK).
Provides linear/logarithmic sweep functions for automatic scanning across set frequency ranges, enabling rapid assessment of circuit frequency response.
Features trigger/gated (Burst) mode for outputting a specified number of waveform cycles, suitable for pulsed applications.
High Precision and Stability:
Utilizes Direct Digital Synthesis (DDS) technology, offering high frequency resolution, low phase noise, and fast frequency switching.
Wide output amplitude range, up to 20 Vp-p (into high-impedance load), with support for DC offset superposition.
Convenient Operation and Connectivity:
Equipped with a large backlit LCD display for clear parameter visibility.
Intuitive front-panel layout combining knobs and buttons for quick setup.
Standard USB interface supports remote control and data storage (with corresponding software).
Typical Application Scenarios
Analog Circuit Testing and Debugging: Providing stimulus signals for circuits like amplifiers and filters to observe their response.
Sensor Excitation and Simulation: Generating specific waveforms to drive or simulate sensor signals (e.g., ultrasonic, vibration sensors).
Education and Training Experiments: Used in university electronics laboratories to demonstrate signal characteristics, modulation principles, and basic circuit experiments.
Basic Component Testing: Used for rough frequency characteristic testing of components like capacitors and inductors.
Professional Calibration Ensures Signal Accuracy
Key parameters of a waveform generator, such as output frequency accuracy, amplitude accuracy, and waveform distortion (e.g., Total Harmonic Distortion - THD for sine waves), can drift over time. Regular calibration is fundamental to ensuring its output signals meet specifications and testing requirements.
The Shenzhen Bao'an Shajing Fangfengrui Instrument Equipment Business Department can provide the following professional services for the WF1973:
Output Accuracy Calibration: Calibrates the instrument's output frequency accuracy, amplitude accuracy (across all attenuation ranges), and DC offset accuracy.
Waveform Quality Verification: Measures parameters such as sine wave Total Harmonic Distortion (THD), square wave rise/fall times, and overshoot.
Modulation Function Checks: Verifies the depth, accuracy, and linearity of modulation functions like AM and FM.
Fault Diagnosis and Repair: Diagnoses and repairs common faults such as no output, waveform distortion, frequency inaccuracy, and unresponsive buttons.
Conclusion
The NF WF1973 Waveform Generator plays the role of a reliable "signal source" in R&D, education, and basic testing, thanks to its wide frequency coverage, diverse waveform outputs, and practical modulation functions. It achieves a good balance between performance, functionality, and cost.
Ensuring that this flexible signal platform continues to operate stably and accurately is a prerequisite for the smooth progress of many experiments and testing procedures. By partnering with a professional service provider like the Shenzhen Bao'an Shajing Fangfengrui Instrument Equipment Business Department, users can ensure their WF1973 and other test instruments maintain good technical condition, providing accurate and reliable signal stimulation for daily work and innovation.
